Bonar Technical Fabrics - We (Under)Cover the World

		Standard Grade Light weight Woven Geotextiles Increasing from 70 to 200g/m2 SG lightweights are used primarily for separation to prevent good quality granular fill intermixing with the poorer soil below. Typical uses include new highways, car parks, airport runways, under stone foundation layers for new buildings etc.
		Standard Grade Heavy weight Woven Geotextiles With possible tensile strengths in excess of 200kN/m, SG heavyweight geotextiles are used in applications where the loadings are severe. Uses include short term basal reinforcement, coastal erosion schemes or areas requiring general soil stabilisation.
		High Flow Woven Geotextiles Used where there exists a requirement for the quick escape of excess water, HF fabrics are used primarily in erosion control applications e.g. under concrete revetment blocks or between dissimilar layers of quick draining granular fill e.g. a coarse sand and rounded gravel
		High Strength Woven Geotextiles Produced from high tenacity polyester yarns, the HS products offer tensile strengths up to 600kN/m combined with low extension and excellent creep characteristics. Applications incl reinforcement of vertical walls, steep slopes and embankments over soft soil with long term design lives.
		Bonar TM Concrete Mattresses a double layer woven polyester construction that, once filled with grout, offers excellent scour protection for the support and stabilisation of hydraulic structures. The mattress design ensures both optimum flexibility and ease of handling during installation.